Acculign, Inc. grants no warranties, express or implied, regarding the program or related materials, their fitness for any purpose, their quality, their merchantability, or otherwise. The liability of Acculign, Inc. shall be limited to the amount paid by the customer for the product, and in no event shall Acculign, Inc. be liable for any special, consequential, or other damages for breach of warranty. By use of the programs and/or materials, the user acknowledges receipt and acceptance of these conditions.
For evaluation of benchmark gauge readings, refer to:
Sketch 401 - Normal Placement of Benchmarks
Sketch 402 - Dual Benchmarks
Sketch 403 - Non-Ideal Placement of Benchmarks
For evaluating coupling alignment, refer to:
Sketch 201 - Face & Rim Method
Sketch 202 - Reverse-Indicator Method
Included are selected portions of the program used in the Acculign "Coach" Alignment Computer, having been revised for use with IBM PC's or compatibles. General instructions, assumptions, and limitations of the program are discussed in the instruction manual for the "Coach" Alignment Computer. Please read and understand these instructions before using the program.
Note: GAGES.EXE is a 16-bit program and will not run natively on a 64-bit Windows OS. There are several solutions to enable a 64-bit system to run the program, depending upon your specific OS. Consult with your IT department for the appropriate solution. Instructions for using VDOS to run GAGES.EXE on a 64-bit system are provided below.
NOTE: DOWNLOADS MAY OPEN AS A NEW WINDOW ON YOUR SCREEN